1 of 3 ___________________________________________________ ___________________________________________________ ________________________ sl power electronics corp ? 6050 king drive ventura, ca 93003 ? phone 805.486.4565 ? fax 858.712.2040 ? email: info@slpower.com ? www.slpower.com model number key f input receptacle. see below for options. "f" rece ptacle (iec320, c14 type, grounded) noted above. 01 modification designator. "01" is standared part, " 02" and higher denotes a modified model. pw170 product family k manufacturing location b design revision changes 05 output voltage 03 output connector. "03" connector is standard. oth er output connectors available. contact the factor y for more details specifications all specifications are typical at nominal input, fu ll load at 25 c unless otherwise stated . ac input 100-240vac, -/-10% (class i), +6%, -10% (class ii), 47-63 hz, 1 ? . mtbf >100,000 hours (calculated) input current 90vac: 0.4a hold-up time 18 ms min. @ 115vac inrush current inrush limiting provided. overvoltage protection built-in input fuses internal primary current fuse is provided. overload protection hiccup mode efficiency meet eisa requirements ? see page 2 short circuit protection hiccup mode output voltage see chart. topology switching ? fixed frequency flyback output power see chart approvals and safety standards en/iec/csa/ul60950-1, emc: en55022/55024/61000 ripple and noise 1% pk-pk max., 20mhz bw dielectric withstand input-output: 3000vac, input-gnd: 1500vac, output-g nd: 500vdc line & load voltage regulation excluding cord: line: +/- 1%, load: +/-5%. operating temperature 0 to 40 c, no derating transient response 500 s max., 50% load step, typical storage temperature -30 to +85 c. minimum load not required. relative humidity 5% to 95%, non-condensing case material: black 94v0 polycarbonate altitude 0 to 10,000 ft. case dimensions: see outline drawing. output connections: cable: 18awg, 1800mm (5v & 6v models: 1500mm), 2 c onductor. connector: 2.5mm barrel type (ault #3) connector, c enter contact (+). other connector options are available. pw170kb universal 10 ? 15 watt series ite switch-mode power supply 3 year warranty ? 100-240vac universal input ? desktop and wall-plug style with either fixed blade s, or interchangeable blades* ( kit sold separately) ? 5v to 48v single output models, up to 15w ? modified and custom designs available ? regulated output with low ripple ? impact-resistant polycarbonate enclosure ? no load power consumption < 0.5w ? meets eisa requirements (see next page for details) . ? meets energy star level iv
2 of 3 ___________________________________________________ ___________________________________________________ ________________________ sl power electronics corp ? 6050 king drive ventura, ca 93003 ? phone 805.486.4565 ? fax 858.712.2040 ? email: info@slpower.com ? www.slpower.com notes: 1 ault #3 connector 2. center contact = positive 3. connector is switchcraft 760 plug or equivalent . 5. other output connector options are available. contact your local representative for details. 4. suggested mating connector is switchcraft 712a jack or equivalent. wall-plug options iec320 iec320 iec320 n. america n. america europe united a ustralia c14 c18 c8 japan japan kingdom grounded ungrounded "shaver" interchangeable fixed fixed fixed fixed (f) (q) (n) (b) (c) (m) (g) (h) notes: 3. blade kit is available which will include one e ach of a eu, uk, and aust blade. kit part number i s kt1027k . can be used with (b) version only, to al low blades to be interchanged. 1. for desktop options, choose the applicable lett er above. 2. for wall-plug options, choose the applicable le tter above. the model will then be fitted only wit h the receptacle chosen. the north american blade versi on (b) will be an interchangeable blade. the other options (c), (m), (g), and (h), will be fixed blade s molded in the case. desktop options model number volts (v) output current (max) max watts ripple (vp-p max) pw170kb0503f01 5 v 2.00 a 10.0 w 50mv pw170kb0603f01 6 v 1.67 a 12.0 w 60mv pw170kb0903f01 9 v 1.50 a 13.5 w 90mv PW170KB1203F01 12 v 1.20 a 15.0 w 120mv pw170kb1503f01 15 v 1.00 a 15.0 w 150mv pw170kb1803f01 18 v 0.84 a 15.0 w 180mv pw170kb2403f01 24 v 0.63 a 15.12 w 240mv pw170kb4803f01 48 v 0.32 a 14.88 w 480mv note: part numbers above include #3 output connect or and iec320 c14 grounded input receptacle. see b elow for other options. input receptacle op tions output connector 2007 energy independence and security act - eisa the energy independence and security act of 2007 wa s passed in december of 2007 and addresses minimum efficiency standards and standby levels for class a external power supplies that are 250 watts and under. this law stipulates that ext ernal power supplies manufactured on july 1, 2008 and beyond meet certain minimum efficiency and standby criteria as defined below. minimum efficiency criteria: active mode is defined as when a power supply?s inp ut is connected to a line voltage ac and it?s outpu t is connected to a dc or ac load, drawing a portion of the product?s power output. depending u pon the power rating for the power supply, it must meet the minimum efficiency criteria outlined below. energy-efficiency criteria for active mode: output power on adapter label 0 to < 1 watt > 1 watt to 51 watts > 51 watts minimum average efficiency percentage 0.50 * output power on the label [0.09 * ln (output power on adapter label)] + 0.50 0.85 energy consumption criteria for no load mode: the power supply must also meet a requirement for w hen its input is connected to line voltage ac but i ts output is not connected to a load. depending upon the power output of the supply, it m ust keep its energy consumption below the following values: output power on adapter label 0 to < 250 watts maximum power consumption in no-load mode 0.50 watts ite switch mode power supply 3 year warranty pw170kb universal 10-15 watt series
3 of 3 ___________________________________________________ ___________________________________________________ ________________________ sl power electronics corp ? 6050 king drive ventura, ca 93003 ? phone 805.486.4565 ? fax 858.712.2040 ? email: info@slpower.com ? www.slpower.com pw170kb universal 10-15 watt series outline drawings dimensions are in mm desktop style (option ?f? shown) wallplug style (option ?b? shown) data sheet ? 2008 sl power electronics corp. the i nformation and specifications contained herein are believed to be correct at the time of publication. rev. 8-10-2009 however, sl power accepts no responsibility for con sequences arising from reproduction errors or inacc uracies. specifications are subject to change with out notice. ite switch mode power supply 3 year warranty
|
